Iwata eclipse vs revolution

Hem / Teknik & Digitalt / Iwata eclipse vs revolution

They really offer exceptional value for money. The .50mm nozzle is one piece while the .35mm has a smaller tip that screws into the cone shaped nozzle. If you buy the 1/3 cc cup, 0.5 mm CR and a conversion kit, the price difference disappear.

You can get the 0.35 mm nozzle Eclipse with 1/3 cc cup (CS) or 1/16 cc cup (BS).

I do not have the Revolution and cannot answer your question on qualitative edge.

EBergerud3

Actually, I’d call that a very important difference.

Models with a 0.5 mm nozzle handle thicker paints better.

Which IWATA airbrush is the best all-rounder?

The Eclipse HP-CS is considered the best balance for painting miniatures, models, textiles, or decorative objects without sacrificing precision.

What pressure should I use with my IWATA airbrush?

Ideal pressure depends on the model and paint, but generally: 1.2–2 bar for fine detail, 1.5–2.5 bar for general work.

Those nozzles are pretty small. There is an 11% discount in effect at Chicago through Sunday though.

Tony

Wingman_kz5

Sorry, stepped away from the computer for a few minutes.

iwata eclipse vs revolution

While the Eclipse 0.5mm nozzle is similar in design to the H&S nozzle, where the tip is of the same material as the rest of the nozzle body, the Eclipse 0.35mm nozzle has the typical, small Iwata nozzle fitted at the tip (screwed or pressed in, I can’t remember).

The Revolution nozzle is about 5mm long;

The Eclipse nozzle (the 0.5mm without the typical nozzle tip) is about 15mm long;

EBergerud8

Bought the Eclipse: cost wasn’t that bad because of the sale.

Well-suited for those who find traditional trigger buttons tiring or unintuitive. If you’re just starting out, the Neo CN is an excellent entry point. The Neo works from 1 bar, while the Eclipse or Micron prefer stable 1.5–2 bar.

How do I clean my IWATA airbrush?

Rinse between each color with a suitable cleaner.

With an Eclipse you can use either .35mm or .50mm nozzles and needles. Never force delicate parts, especially the needle and nozzle.

Conclusion: Which IWATA Airbrush Should You Choose?

Choosing an IWATA airbrush mainly depends on your skill level, intended use, and budget. More advanced users will prefer the Hi-Line HP-BH or Micron CM-C Plus for ultra-precise work.

Finally, if you’re looking for trigger comfort or work on large surfaces, the TRN2 or HP-TH models will meet your needs.

The most important thing isn’t having the most expensive tool, but the one that fits your painting style best. A well-chosen IWATA airbrush will serve you faithfully for years.

.

It handles paints like Citadel or Vallejo Model Air (slightly thinned) well and doesn’t require a high-end compressor.

It is easy to swap out bottles of specific colors quickly with siphon-feed airbrush model. It’s better to start with an affordable model (like the Neo or Revolution), learn the basics, and upgrade later if needed.

Are all IWATA airbrushes compatible with acrylic paints?

Yes, as long as the paint is properly thinned and the airbrush is cleaned after each session.

The Revolution and Eclipse share some parts but the nozzles and head system are different. The Eclipse has the self center design. If you are looking for the best airbrush under 100$, carry on reading.

Double action Revolution Airbrushes

  • The Revolution BCR is a bottle-feed, dual-action airbrush for general-use spraying.

    Looking forward to trying it out.

    Eric

    Eric,

    Let us know what you feel as the pros and cons of the Eclipse vs. I was thinking Iwata because it’s needles and nozzles may be a bit tougher: and I already have a HS Evol - little boring to have two.

    You can get a gravity fed .35 nozzle in both the Iwata Revolution and Eclipse.